1. |
These dimensions indicate the actual linear distance between measurement
points, and are used as the reference dimensions when a tracking gauge
is used for measurement.
|
2. |
First adjust both probes to the same length (A=A') before measurement.
|
Door Switch Removal
1.
Remove the door switch (A) after loosening the bolt.
...
Transaxle Control Module (TCM) Terminal Function
Connector [EGGG-AA]
Pin
Description
Pin
Description
22
Shift solenoid D (VFS-OD)
73
Inhibitor switch signal "S4"
...
Defroster
CAUTION - Conductors
To prevent damage to the conductors bonded to the inside surface of the rear
window, never use sharp instruments or window cleaners containing abrasives to clean
the window. ...