1. |
Check the terminal for tightness.
|
2. |
Check terminals and wires for corrosion from battery electrolyte,
etc.
|
3. |
Check terminals and wires for open circuits.
|
4. |
Check wire insulation and coating for damage, cracks and degrading.
|
5. |
Check the conductive parts of terminals for contact with other
metallic parts (vehicle body and other parts).
|
6. |
Check grounded parts to verify that there is complete continuity
between their attaching bolt(s) and the vehicle's body.
|
7. |
Check for incorrect wiring.
|
8. |
Check that the wiring is so clamped to the prevent contact with
sharp corners of the vehicle body, etc. or hot parts (exhaust manifold,
etc.)
|
9. |
Check that the wiring is clamped firmly to provide enough clearance
from the fan pulley, fan belt and other rotating or moving parts.
|
10. |
Check that the wiring has a little space so that it can vibrate
between fixed and moving parts such as the vehicle body and the engine.
|
Inspection
Front Door Lock Actuator and Switch
1.
Remove the front door trim.
(Refer to the Body group - Front door)
2.
Remove the front door l ...
Ignition Coil: Installation
1.
Install in the reverse order of removal.
Ignition coil installation bolts:
9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 Ib-ft)
...
Input Speed Sensor Description
Input speed sensor (A) is a vital unit that measures the rate of rotation
of the input shaft inside the transaxle and delivers the readings to the TCM.
The sensor provides critical input data ...