Tool (Number and name) |
Illustration |
Use |
Crankshaft front oil seal installer (09455-21200) |
|
Installation of the front oil seal |
Valve stem oil seal installer (09222-2B100) |
|
Installation of the valve stem oil seal |
Valve spring compressor and holder A : (09222-3K000) B : (09222-3K100) |
|
Removal and installation of the intake or exhaust valve |
Crankshaft rear oil seal installer A : (09231-H1100) B : (09231-2B200) |
|
Installation of the crankshaft rear oil seal |
Ring gear stoppper (09231-2B100) |
|
Installation of crankshaft pulley bolt |
Engine coolant temperature sensor socket wrench (09221-25100) |
|
Removal and installation of engine coolant sensor |
Oil pan remover (09215-3C000) |
|
Removal of oil pan |
Torque angle adapter (09221-4A000) |
|
Installation of bolts & nuts needing an angular method |
Inhibitor Switch Installation
1.
Check that the shift lever is placed in the "N" position
2.
Install the inhibitor switch (A).
...
Cowl Top Cover Replacement
1.
Remove the wiper arm cover (B).
2.
After loosening the mounting nuts, then remove the wiper arm (A).
Tightening to ...
Specification
Engine
T/M
Joint type
Max. permissible angle
Outer
Inner
Outer
Inner
Gasoline 1.6
MT, AT
BJ#82
TJ#82
...