Kia Rio: Removal
| 1. |
Remove the cyliner head cover.
(Refer to Timing System)
|
| 2. |
Remove the timing chain cover.
(Refer to Timing System)
|
| 3. |
Remove the timing chain.
(Refer to Timing System)
|
| 4. |
Remove the exhaust oil control valve (OCV) adapter (A).
|
| 5. |
Remove the camshaft bearing caps (A) with the order below and
then detach the intake camshaft and exhaust camshaft.
|
| 6. |
Remove the intake CVVT assembly (A) and exhaust CVVT (B).
|
[CVVT System Mode]
(1) Low Speed / Low Load
(2) Part Load
(3) Low Speed / High Load
(4) High Speed / High Load
...
Inspection
Camshaft Assembly
1.
Inspect the cam height.
Using a micrometer, measure the cam height.
Cam height
Intake : 44.15mm (1.7382in ...
See also:
Front Hub / Knuckle Reassembly
1.
Install the hub bearing to the knuckle assembly.
(1)
Lay the knuckle assembly (A) on press.
(2)
...
Defroster
CAUTION - Conductors
To prevent damage to the conductors bonded to the inside surface of the rear
window, never use sharp instruments or window cleaners containing abrasives to clean
the window. ...
Vehicle weight
This section will guide you in the proper loading of your vehicle and/or trailer,
to keep your loaded vehicle weight within its design rating capability, with or
without a trailer.
Properly loadi ...
Copyright © www.kirmanual.com 2014-2024