1. |
Install the intake CVVT (A) and exhaust CVVT (B).
|
2. |
Install the camshaft bearing caps (A) with the order below after
setting the intake camshaft and exhaust camshaft on the cylinder head.
|
3. |
Install the exhaust oil control valve (OCV) adapter (A).
|
4. |
Install the timing chain.
(Refer to Timing System)
|
5. |
Install the timing chain cover.
(Refer to Timing System)
|
6. |
Install the cylinder head cover.
(Refer to Timing System)
|
Underdrive Brake Control Solenoid Valve(UD/B_VFS) Specifications
Direct control VFS[35R/C]
▷ Control type : Normal low type
Control Pressure kpa (kgf/cm², psi)
500.14 ~ 9.81 (5.1 ~ 0.1,72.54 ~ 1.42)
Current value(mA ...
Removal
1.
Disconnect the battery terminal (A).
2.
Remove the air duct and air cleaner assembly.
(Refer to Engine Mechanical System - & ...
Compressor Oil Specification
1.
The HFC-134a system requires synthetic compressor oil (PAG) whereas
the R-12 system requires mineral compressor oil. The two oils must never
be mixed.
...