Kia Rio: Thermostat: Removal
Disassembly of the thermostat would have an adverse effect, causing
a lowering of cooling efficiency.
|
| 1. |
Drain engine coolant so that its level would be under the thermostat
height.
|
| 2. |
Remove the radiator lower hose.
|
| 3. |
Remove the water inlet fitting (A) and thermostat (B).
|
Thermostat: Components
1. Water inlet fitting
2. Thermostat
3. Heater pipe
4. Water temp control assembly
5. Water temperature sensor
6. Gasket
...
Inspection
1.
Immerse the thermostat in water and gradually heat the water.
2.
Check the valve opening temperature.
Valv ...
See also:
Components
1. Brake booster
2. Master cylinder assembly
3. O-ring
...
Hands free switch Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the driver airbag module.
(Refer to the RT group - "DAB and Clock spring ...
Rear Hub - Carrier Components
[Drum Type]
1. Rear torsion beam assembly
2. Brake assembly
3. Rear wheel hub assembly
4. Rear brake disc
5. Rear brake disc mounting screw
...
Copyright © www.kirmanual.com 2014-2024