1. |
Place the thermostat in the block.
Install the thermostat (B) with the jiggle valve upward.
|
2. |
Install the water inlet fitting (A).
|
3. |
Fill with engine coolant.
|
4. |
Start engine and check for leaks.
|
Weight Classification System (WCS) Description
WCS is intended to detect the occupant’s physique in order to determine
whether the passenger airbag should be suppressed or deployed. WCS classifies
the front passenger side seat by measurin ...
Roof Trim
Components
[General Type]
1 . Roof trim
2 . Sunvisor
3 . Retainer
4 . Assist handle bracket assembly
[Sunroof Type]
1 . Roof t ...
Measuring Body Dimensions
1.
Basically, all measurements in this manual are taken with a tracking
gauge.
2.
When a measuring tape is used, check to be sure there is ...