1. |
Disconnect the battery negative terminal.
|
2. |
Remove the air cleaner assembly. (Refer to Intake and exhaust
system in this group)
|
3. |
Remove the under covers (A).
|
4. |
Loosen the drain plug and drain the coolant. Open the radiator
cap to make rapid draining.
|
5. |
Remove the radiator upper hose (A) and lower hose (B).
|
6. |
Disconnect the fan connector (A) and the ATF cooler hoses (B)(A/T
only). (Refer to AT group)
|
7. |
Remove the front bumper. (Refer to BD group)
|
8. |
Remove the rail (A) and the air guard (B).
|
9. |
Remove the cover (A).
|
10. |
Remove the upper cover (A) and the radiator mounting brackets
(B).
|
11. |
Remove the A/C condenser (A) from the radiator assembly and then
lift up the radiator assembly (B).
|
12. |
Remove the cooling fan (A) from the radiator (B).
|
13. |
Installation is reverse order of removal.
|
Instructions
When Handling Refrigerant
1.
R-134a liquid refrigerant is highly volatile. A drop on the skin
of your hand could result in localized frostbite. When handling the
r ...
Mode Control Actuator Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad.
(Refer to BD group - "Crash Pad")
...
Rear Bumper Replacement
[5 Door]
•
Put on gloves to protect your hands.
•
...