Kia Rio: Lubrication System

Radiator: Inspection

Radiator Cap Testing 1. Remove the radiator cap, wet its seal with engine coolant, then install it to pressure tester. 2. Apply ...

Oil Pump: Components

1. Timing chain cover 2. Inner roter 3. Outer roter 4. Pump cover 5. Gasket 6. Oil screen 7. Oil pan 8. Drain plug gasket 9. Oil drain plug ...

See also:

Inspection
1. Turn the ignition switch OFF. 2. Disconnect the injector connector. 3. Measure resistance between the inject ...

Schematic Diagram
Canister The Canister is filled with charcoal and absorbs evaporated fuel vapor from the fuel tank. The gathered fuel vapor in canister is drawn into the intake manifold by the ECM/PC ...

Inspection
1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the FTPS. Specification: ...