1. |
Check the engine oil quality.
Check the oil deterioration, entry of water, discoloring of thinning.
If the quality is visibly poor, replace the oil.
|
2. |
Check the engine oil level.
After engine warm up stop the engine wait 5 minutes then check
the oil level. Oil level should be between the "L" and "F" marks on
the dipstick. If low check for leakage and add oil up to the "F" mark.
|
For best performance and maximum protection of all types of operation,
select only those lubricants which :
|
Cruise Control Switch: Inspection
Measuring Resistance
1.
Disconnect the cruise control switch connector from the control
switch.
2.
Measure resistance between t ...
Hands free switch Schematic Diagrams
Circuit Diagram(1)
Circuit Diagram(2)
...
Troubleshooting
Symptom
Possible cause
Remedy
Speedometer does not operate
Cluster fuse (10A) is blown
Check for short and replace fuse
Speedometer faulty
...