Kia Rio: Oil Pan: Installation
1. |
Install the oil pan.
(1) |
Using a razor blade and gasket scraper, remove all the
old packing material from the gasket surfaces.
Check that the mating surfaces are clean and dry
before applying liquid gasket.
|
|
(2) |
Apply liquid gasket as an even bead, centered between
the edges of the mating surface.
Liquid gasket :
TB 1217H or LOCTITE 5900H
|
• |
To prevent leakage of oil, apply liquid
gasket to the inner threads of the bolt holes.
|
• |
Do not install the parts if five minutes
or more have elapsed since applying the liquid
gasket.
Instead, reapply liquid gasket after removing
the residue.
|
• |
After assembly, wait at least 30 minutes
before filling the engine with oil.
|
|
|
(3) |
Install the oil pan (A) with the bolts.
Uniformly tighten the bolts in several passes.
Tightening torque :
9.8 ~ 11.8N.m (1.0 ~ 1.2kgf.m, 7.2 ~ 8.7lb-ft)
|
|
|
1.
Remove the under covers (A).
Tightening torque:
6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ~ 8.0 lb-ft)
...
1.
Check the continuity between the terminal and the body with an
ohmmeter. If there is no continuity, replace the oil pressure switch.
2.
...
See also:
Towing
Towing service
If emergency towing is necessary, we recommend having it done by an authorized
Kia dealer or a commercial tow-truck service. Proper lifting and towing procedures
are necessary to ...
4Door Front Body A
Hood hinge mounting hole (Ø11)
Fender apron upper member tooling hole (Ø6.6)
Front shock absorber hou ...
Specification
Item
Specification
Capacitance (pF)
950 ~ 1,350
Resistance (MΩ)
4.87
...