[1st Method] |
1. |
Start the engine and keep the engine running at idle for 2 minutes.
|
2. |
Step on the accelerator pedal and hold it steady at 4500 rpm with
the shift lever in N position to warm up the engine until the
temperature of the engine coolant reaches 80°C.
|
3. |
Keep the engine running at 2500~3000 rpm in the N position for
15 minutes.
|
[2nd Method] |
|
1. |
Start the engine and keep the engine running at idle for 2 minutes.
|
2. |
Drive the vehicle for over 20 minutes, keeping the engine speed
above 3500 rpm.
|
Air bag collision sensors
(1) SRS control module
(2) Front impact sensor
(3) Side impact sensor
WARNING - Air bag sensors
Do not hit or allow any objects to impact the locations where air bag
or sensors are installed ...
CVVT (Continuously Variable Valve Timing) System: Description
Continuous Variable Valve Timing (CVVT) system advances or retards the
valve timing of the intake and exhaust valve in accordance with the ECM control
signal which is calculated by the engine ...
Starter: Cleaning
1.
Do not immerse parts in cleaning solvent. Immersing the yoke assembly
and/or armature will damage the insulation. Wipe these parts with a
cloth only.
...