Kia Rio: Charging System

Spark Plug: Installation

1. Install in the reverse order of removal. Spark Plug Installation : 14.7 ~ 24.5 N.m (1.5 ~ 2.5 kgf.m, 10.8 ~ 18.0 Ib-ft) ...

Description

The charging system included a battery, an alternator with a built-in regulator, and the charging indicator light and wire. The Alternator has eight built-in diodes, each rectifying AC curre ...

See also:

Electric Oil Pump: Removal
1. Disconnect the negative (-) battery terminal. 2. Disconnect the Electric Oil Pump (EOP) connector (A). 3. ...

TJ Joint Replacement
   • Special grease must be applied to the driveshaft joint. Do not substitute with another ...

Alternator: Removal and installation
1. Disconnect the battery negative terminal first, then the positive terminal. Tightening torque (+) terminal : 7 ...