Kia Rio: Specification
[AMS type (NON-OAD)]
| Item |
Specification |
|
| Rated voltage |
13.5V, 90A |
|
| Speed in use |
1,000 ~ 18,000 rpm |
|
| Voltage regulator |
IC Regulator built-in type |
|
| Regulator Setting Voltage |
External mode |
Refer to below graph |
| Internal mode |
14.55 ± 0.3V |
|
| Temperature Gradient |
External mode |
0 ± 3 mV / °C |
| Internal mode |
-3.5 ± 2mV / °C |
|
※ Regulator Setting Voltage (External mode)
[ISG type (NON-DAD) / AMS type (OAD)]
| Item |
Specification |
|
| Rated voltage |
13.5V, 110A |
|
| Speed in use |
1,000 ~ 18,000 rpm |
|
| Voltage regulator |
IC Regulator built-in type |
|
| Regulator Setting Voltage |
External mode |
Refer to below graph |
| Internal mode |
14.55 ± 0.3V |
|
| Temperature Gradient |
External mode |
0 ± 3 mV / °C |
| Internal mode |
-3.5 ± 2mV / °C |
|
※ Regulator Setting Voltage (External mode)
Description
The Alternator has eight built-in diodes, each rectifying AC current to
DC current.
Therefore, DC current appears at alternator "B" terminal.
In addition, the charging voltage ...
Components
[AMS type (OAD)]
1. OAD (Overrunning Alternator Decoupler)
2. Front Bracket
3. Front Bearing
4. Stator
5. Rotor
6. Rear Bearing
7. Rear Bracket
8. ...
See also:
Auto Light Sensor Installation
1.
Reconnect the auto light connector.
2.
Install the auto light sensor.
...
Head Lamp Leveling Switch Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel.
(Refer to the BD group - "Crash pad")
...
Engine oil
Checking the engine oil level
1. Be sure the vehicle is on level ground.
2. Start the engine and allow it to reach normal operating temperature.
3. Turn the engine off and wait for a few minutes ...
Copyright © www.kirmanual.com 2014-2024