1. |
Disconnect the battery negative terminal.
|
2. |
Disconnect the air compressor connector (A) and the alternator
connector (B), and remove the cable from alternator "B" terminal (C).
|
3. |
Loosen the mounting bolts, and then turn the adjusting bolt (A)
clockwise to loosen tension.
|
4. |
Remove the drive belt (A).
|
5. |
Remove the alternator (A) after remove the mounting bolts.
|
Checking Cables And Wires
1.
Check the terminal for tightness.
2.
Check terminals and wires for corrosion from battery electrolyte,
etc.
3.
...
Oil Pump Description
The oil pump is built-in as a single unit with the 26 brake chamber. Rotation
of the pump builds the hydraulic pressure needed for the lubrication of the
various parts of the transaxle and op ...
Valve Body Installation
1.
Installation is the reverse of removal.
After replacement or reinstallation procedure of ...