Kia Rio: Reassembly

Disassembly

1. Remove the rear cover (A) after removing nuts. 2. Remove the mounting bolts (A) and the brush holder assembly (B). ...

Inspection

[Rotor] 1. Check that there is continuity between the slip rings (C). 2. Check that there is no continuity between the slip ...

See also:

BCM Overview
The Body Control Module (A) supplies vehicle occupants with visual and audible information and controls various vehicle functions. To provide and receive information, the module is interface ...

Component Location
1. Sunroof 2. Sunroof switch 3. Sunroof motor & controller ...

Smart key unit Removal
Smart key unit [USA] 1. Disconnect the negative(-) battery terminal. 2. Remove the smart key unit (A) after disconnecting the c ...