Kia Rio Manuals

Kia Rio: Installation - DC DC Converter - Charging System - Engine Electrical System - Kia Rio UB 2012-2024 Service ManualKia Rio: Installation

1.
Install in the reverse order of removal.

     
•
After reconnecting the battery negative cable, ISG function dose not operates until the system is stabilized, about 4 hours.
If disconnecting the negative (-) battery cable from the battery during repair work for the vehicle equipped with ISG function, Battery sensor recalibration procedure should be performed after finishing the repair work.
(Refer to Charging System - "Battery Sensor")
Removal
1. Disconnect the battery negative terminal. 2. Remove the glove box housing. (Refer to Body - "Glove Box Housing") ...

Battery
...

See also:

Circuit Diagram
...

TPMS Sensor Installation
Sensor Fit    • Handle the sensor with care. • ...

Head Lamps Removal
Head Lamp 1. Disconnect the negative (-) battery terminal. 2. Remove the radiator grille upper cover (A), after loosening the mounting ...

Categories


Copyright © www.kirmanual.com 2014-2024