1. |
Disconnect the battery terminal (A).
|
2. |
Remove the air duct and air cleaner assembly.
(Refer to Engine Mechanical System - "Air Cleaner")
|
3. |
Remove the battery mounting bracket and the insulation pad (A),
and then remove the battery(B).
|
4. |
Disconnect the ECM connector (A), and then remove ECM (B) after
removing the bolts/nut.
|
5. |
Remove the battery tray (C) after removing the bolts.
|
Special Service Tools
Tool (Number and name)
Illustration
Use
09977-25100
Disc & hub assembly bolt remover
Removal and installation of disc & hub assembly ...
Installation
1.
Installation is the reverse of removal.
2.
After installation, bleed the brake system.
(Refer to Brake system bleeding)
...
Removal
1.
Remove the following items;
A.
Air cleaner assembly (A) and air duct (B).
(Refer to "Intake and Exhaust system" ...