Kia Rio: Starter: Specification
Starter [Non-ISG type]
| Item |
Specification |
|
| Rated voltage |
12 V, 0.9 kW |
|
| The number of pinion teeth |
10 |
|
| Performance [No-load, 11.5 V] |
Ampere |
Max. 60 A |
| Speed |
Min. 5,500 rpm |
|
Starter [ISG type]
| Item |
Specification |
|
| Rated voltage |
12 V, 1.3 kW |
|
| The number of pinion teeth |
11 |
|
| Performance [No-load, 12 V] |
Ampere |
Max. 95 A |
| Speed |
Min. 3400 rpm |
|
Starter: Description
The starting system includes the battery, starter, solenoid switch, ignition
switch, inhibitor switch (A/T), clutch pedal switch (M/T), ignition lock switch,
connection wires and the battery ...
Starter: Components
1. Screw
2. Front housing
3. Stop ring
4. Stopper
5. Overunn clutch
6. Lever
7. Lever plate
8. Lever packing
9. Magnet switch assembly
10. Armature assemb ...
See also:
Starter: Reassembly
1.
Reassemble in the reverse order of disassembly.
...
SRS Control Module (SRSCM) Installation
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable and wait for at least three
minutes before beginning ...
Receiver-Drier Replacement
1.
Remove the condenser.
2.
Remove the cap (B) on the bottom of the condenser with L wrench
(A).
Tightening torq ...
Copyright © www.kirmanual.com 2014-2024