Kia Rio: Starter: Cleaning
| 1. |
Do not immerse parts in cleaning solvent. Immersing the yoke assembly
and/or armature will damage the insulation. Wipe these parts with a
cloth only.
|
| 2. |
Do not immerse the drive unit in cleaning solvent. The overrun
clutch is pre-lubricated at the factory and solvent will wash lubrication
from the clutch.
|
| 3. |
The drive unit may be cleaned with a brush moistened with cleaning
solvent and wiped dry with a cloth.
|
Starter: Inspection
Starter Solenoid Inspection
1.
Disconnect the lead wire from the M-terminal of solenoid switch.
2.
Connect the battery as shown. If ...
See also:
Description
System Overview
The System offers the following features:
-
Human / machine interface through a 1-stage button, for terminal
switching and engine start.
...
Windshield Wiper-Washer Switch Removal
Wiper and Washer Switch
1.
Disconnect the negative (-) battery terminal.
2.
Remove the steering wheel.
(Refer to the ST group - &qu ...
Valve Clearance Inspection And Adjustment
Inspect and adjust the valve clearance when the engine is cold
(Engine coolant temperature : 20°C) and cylinder head is ...
Copyright © www.kirmanual.com 2014-2024