Kia Rio: Cruise Control Switch: Removal
| 1. |
Disconnect the battery (-) terminal.
|
| 2. |
Remove the air-bag module from the steering wheel. (Refer to Restraint
- "Driver Airbag (DAB) Module and Clock Spring")
|
| 3. |
Remove the steering wheel. (Refer to Steering System - "Steering
Column and Shaft")
|
| 4. |
Remove the steering wheel cover (A) after loosening 6 screws.
|
| 5. |
Remove the remote control switch after loosening 2 screws and
disconnecting the connector.
|
Cruise Control Switch: Installation
1.
Install in the reverse order of removal.
...
See also:
Oil Pump Unit (OPU) Removal
1.
Remove the negative (-) battery terminal.
2.
Remove the crash pad lower panel. (Refer to “Crash pad” in BD
group.)
...
Components Location
1. Torsion beam axle
2. Shock absorber
3. Coil spring assembly
4. Rear disc
...
Antenna Inspection
Antenna Cable
1.
Remove the antenna jack from the audio unit and antenna.
2.
Check for continuity between the center poles of antenna cable. ...
Copyright © www.kirmanual.com 2014-2024