Kia Rio: Adjustment
| ETC module learning procedure |
When installing new ETC module or re-installing it, ETC module learning
procedure must be performed.
| 1. |
Hold the ignition key or the start button at the IG ON position
during 5 seconds.
|
| 2. |
Turn ignition swich OFF and then start the engine.
|
DTC codes (P0638, P2110) might be displayed if ETC module learning
procedure does not performed after replacing ETC module.
|
Installation
•
Install the component with the specified torques.
•
...
See also:
SRS Care
The SRS is virtually maintenancefree and there are no parts you can safely service
by yourself. If the SRS air bag warning light does not illuminate, or continuously
remains on, have your vehicle ...
Towing
Towing service
If emergency towing is necessary, we recommend having it done by an authorized
Kia dealer or a commercial tow-truck service. Proper lifting and towing procedures
are necessary to ...
Specification
Item
Specification
Coil Resistance (Ω)
0.5 [20°C(68°F)
...
Copyright © www.kirmanual.com 2014-2024