Kia Rio: Inspection
| 1. |
Turn the ignition switch OFF.
|
| 2. |
Disconnect the HO2S connector.
|
| 3. |
Measure resistance between the HO2S terminals 4 and 5 [B1/S1].
|
| 4. |
Measure resistance between the HO2S terminals 3 and 4 [B1/S2].
|
| 5. |
Check that the resistance is within the specification.
|
Circuit Diagram
(M/T)
(A/T)
...
Removal
1.
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
2.
Disconnect the connector (A), and then remove the sensor ...
See also:
Installation
•
Install the component with the specified torques.
•
...
Steering Column and Shaft Inspection
1.
Check the steering column for damage and deformation.
2.
Check the steering column for damage and deformation.
3.
...
Specifications
Items
Specifications
Rated voltage
DC 5V
Load
Max. 1.5mA (When head lamp lighting)
Operating voltage range
DC 4.6 ~ 5.1V
...
Copyright © www.kirmanual.com 2014-2024