Kia Rio: Rail Pressure Sensor (RPS)

Installation

   • Install the component with the specified torques. • ...

Description

Rail Pressure Sensor (RPS) is installed on the delivery pipe and measures the instantaneous fuel pressure in the delivery pipe. The sensing element (Semiconductor element) built in the sensor ...

See also:

Underdrive Brake Control Solenoid Valve(UD/B_VFS) Removal
   Replacing an on/off solenoid valve (SS-A, SS-B) does not require additional hydraulic pressure adjustment; however, the ...

LCD display warning (if equipped)
For vehicle’s equipped with smart key system Key is not in vehicle If the smart key is not in the vehicle and if any door is opened or closed with the engine start/stop button in the ACC, ON, or ...

Blower Unit Replacement
1. Remove the heater & blower unit. (Refer to HA group - "Heater Unit") 2. Separate the blower unit from the heater unit a ...