Kia Rio: Accelerator Position Sensor (APS)

Installation

   • Install the component with the specified torques. • ...

Description

Accelerator Position Sensor (APS) is installed on the accelerator pedal module and detects the rotation angle of the accelerator pedal. The APS is one of the most important sensors in engine ...

See also:

Release Residual Pressure in Fuel Line
   Whenever the high pressure fuel pump, fuel pipe, delivery pipe, or injector is removed immediately after shutting off th ...

Input Speed Sensor Inspection
1. Check signal waveform of Input & output speed sensor using the GDS. Specification: Refer to "Signal Wave Form" section. ...

Rear Torsion Beam Axle Replacement
[Disc Type] 1. Remove the rear wheel & tire. Tightening torque : 88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft) ...