Kia Rio: Description

Accelerator Position Sensor (APS) is installed on the accelerator pedal module and detects the rotation angle of the accelerator pedal. The APS is one of the most important sensors in engine control system, so it consists of the two sensors which adapt individual sensor power and ground line. The second sensor monitors the first sensor and its output voltage is half of the first one. If the ratio of the sensor 1 and 2 is out of the range (approximately 1/2), the diagnostic system judges that it is abnormal.

Accelerator Position Sensor (APS)

...

Specification

Accelerator Position Output Voltage (V) APS1 APS2 C.T 0.7 ~ 0.8 0.275 ~ 0.475 W.O.T 3.8 ~ 4.4 1.75 ~ 2.35 ...

See also:

Turn Signal Lamp (Door mirror) Installation
Door Mirror Turn Signal Lamp 1. Install the door mirror turn signal lamp to the door mirror. 2. Install the door mirror. ...

Components
1. Battery (Non-ISG Type) 2. Battery (ISG Type) 3. Battery tray 4. Battery insulation pad 5. Battery mounting bracket ...

Component Location
1. Headlamp leveling device 2. Headlamp leveling actuator ...