Kia Rio: Specification - Injector - Engine Control System - Engine Control / Fuel System - Kia Rio UB 2012-2024 Service ManualKia Rio: Specification

Item
Specification
Coil Resistance (Ω)
1.5 [20°C(68°F)]

Description
The GDI injector is similar to a standard injector, but sprays fuel at a much higher pressure directly into the combustion chamber and has a swirl disc to get the fuel swirling as it exits th ...

Signal Waveform
The three waveforms below are taken from the #1 and #4 injectors. The top waveform is from the high side (feed side) of the #1 and #4 injectors, while the middle waveform is from the low side ...

See also:

Component Location
1. Tailgate actuator & switch 2. Rear door switch 3. Body control module 4. Key warning switch 5. Front door switch 6. Front door lock actuator & switch 7. Rear do ...

Side Airbag (SAB) Module Removal
   The side airbag cannot be disassembled from the seat back assembly, so replace the seat back assembly when replacing the ...

Inspection
Front Brake Disc Thickness Check 1. Check the brake pads for wear and fade. 2. Check the brake disc for damage and cracks. ...

Copyright © www.kirmanual.com 2014-2024