Kia Rio: Purge Control Solenoid Valve (PCSV)

Replacement

The injector combustion seal should be replaced new one to prevent leakage after removing the injector. 1. Remove the combustion seal (A) with a wire cutter. ...

Description

Purge Control Solenoid Valve (PCSV) is installed on the surge tank and controls the passage between the canister and the intake manifold. It is a solenoid valve and is open when the ECM groun ...

See also:

Tightening Torque
Items N.m kgf.m lb-ft Front and rear doors Door hinge to body 34.3 ~ 41.2 3.5 ~ 4.2 25.3 ~ 30.4 Door hinge to door ...

Installation
   • Install the component with the specified torques. • ...

Starter: Removal
1. Disconnect the battery negative terminal. 2. Remove the air duct and air cleaner assembly. (Refer to Engine Mechanical System - &quo ...