Kia Rio: Removal
| 1. |
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
|
| 2. |
Lift the vehicle.
|
| 3. |
Disconnect the canister close valve connector (A).
|
| 4. |
Disconnect the ventilation hose (B) from the fuel tank air filter
and canister close valve.
|
| 5. |
Remove the fuel tank air filter assembly after removing a bolt
(A).
|
| 6. |
Remove the bracket (A) after pulling it.
|
| 7. |
Release the lever (A) by lifting it up.
|
| 8. |
Remove the canister close valve (B) from the fuel tank air filter
(C) after rotating it in the direction of the arrow in the figure.
|
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the CCV connector.
3.
Measure resistance between the CCV termina ...
Installation
•
Install the component with the specified torques.
•
...
See also:
Wave Form
...
Operation Principle
The CVVT has the mechanism rotating the rotor vane with hydraulic force
generated by the engine oil supplied to the advance or retard chamber in accordance
with the CVVT oil control valve con ...
Components
1. Driver Airbag (DAB)
2. Steering Wheel
3. Clock Spring
4. Seat Belt Pretensioner (BPT)
5. Pressure Side Impact Sensor (P-SIS)
6. Side Impact Sensor (SIS)
7. Side Airbag ...
Copyright © www.kirmanual.com 2014-2024