Kia Rio: Components Location
| 1. Battery sensor 2. Brake Booster Vacuum Pressure Sensor (BBVPS) 3. AGM battery 4. DC/ DC Converter (LDC) 5. ISG OFF Switch 6. Alternator 7. Starter |
8. Brake switch 9. Door switch 10. Seat belt switch 11. Hood switch 12. Electric Oil Pump (EOP) 13. Oil Pump Unit (OPU) |
| 1. Battery sensor 3. AGM battery |
2. Brake Booster Vacuum Pressure Sensor (BBVPS) |
|
|
|
| 4. DC/ DC Converter (LDC) |
5. ISG OFF Switch |
|
|
|
| 6. Alternator |
7. Starter |
|
|
|
| 8. Brake switch |
9. Door switch |
|
|
|
| 10. Seat belt switch |
11. Hood switch |
|
|
|
| 12. Electric Oil Pump (EOP) |
13. Oil Pump Unit (OPU) |
|
|
|
Operation Condition for the ISG function
1. Auto stop or Auto start condition
(If all of the below condition are satisfied)
Items
State
Remark
Driving conditions
ISG OFF Switch
...
Battery Sensor: Description
Vehicles have many control units that use more electricity. These units
control their own system based on information from diverse sensors. It is important
to have a stable power supply as th ...
See also:
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the OCV connector.
3.
Measure resistance between the OCV termina ...
Rear Wheel Speed Sensor Inspection
1.
Measure the output voltage between the terminal of the wheel speed
sensor and the body ground.
...
Refrigerant System Service Basics
Refrigerant Recovery
Use only service equipment that is U.L-listed and is certified to meet
the requirements of SAE J2210 to remove HFC-134a (R-134a) from the air conditioning
system.
...
Copyright © www.kirmanual.com 2014-2024