Kia Rio: Brake Booster Vacuum Pressure Sensor: Inspection
| 1. |
Check installation status of BBVPS and Vacuum hose or damage of
vacuum hose.
|
| 2. |
Connect GDS to DLC (Data Link Cable).
|
| 3. |
Warm up the engine to normal operating temperature.
|
| 4. |
Monitor "BBVPS" parameter on GDS.
Fig.1) Idle Status
Fig.2) Brake pressure signal
|
AGM Battery: Description
AGM battery is used for especially heavy load on the vehicle network depending
on equipment and requirements. AGM stands for Absorbent Glass Material Battery;
that is absorbent glass fibre fl ...
See also:
Steering Gear box Components
1. Tie-rod end
2. Lock nut
3. Bellows clip
4. Bellows
5. Tie rod
6. Rack bar
7. Dust packing
8. Dust cap
9. Oil seal
10. Pinion plug
11. Pinion assembl ...
Heater & A/C Control Unit (MANUAL) Schematic Diagram
...
Climate control air filter
Filter inspection
The climate control air filter should be replaced according to the Maintenance
Schedule. If the vehicle is operated in severely air-polluted cities or on dusty
rough roads for a ...
Copyright © www.kirmanual.com 2014-2024