Kia Rio: DC/DC Converter: Removal and Installation
| 1. |
Disconnect the battery negative terminal.
|
| 2. |
Remove the glove box housing. (Refer to BD group)
|
| 3. |
Disconnect the connector (A) and then remove the DC/DC converter
(B).
|
| 4. |
Installation is reverse order of removal.
|
DC/DC Converter: Circuit Diagram
In the ISG mode, if the power of an audio system turnsOFF by drawdown
while “Auto Starting” or “Idle Starting”functi ...
ISG OFF Switch: Description
The ISG OFF switch on the crash pad lower panel can be used to deactivate
the ISG function.
...
See also:
Driver's and passenger's front air bag
Your vehicle is equipped with an Advanced Supplemental Restraint (Air Bag) System
and lap/shoulder belts at both the driver and passenger seating position.
The indications of the system's prese ...
Emergency starting
Connect cables in numerical order and disconnect in reverse order.
Jump starting
Jump starting can be dangerous if done incorrectly. Therefore, to avoid harm
to yourself or damage to your vehicl ...
Removal
•
Do not spill brake fluid on the vehicle; it may damage
the paint if brake fluid does c ...
Copyright © www.kirmanual.com 2014-2024