1. |
Remove the crash pad side switch assembly (A) from the switch
panel on the crach pad of the driver's side.
|
2. |
Remove the ISG switch (A) from the switch assembly.
|
3. |
Check the continuity between the switch 2 and 3 terminals as the
ISG OFF switch is engaged.
|
Yaw-rate and G Sensor Removal
1.
Turn ignition switch OFF and disconnect the negative (-) battery
cable.
2.
Remove the front seat (LH) assembly.
(Refer to the Bo ...
Ignition Coil: Installation
1.
Install in the reverse order of removal.
Ignition coil installation bolts:
9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 Ib-ft)
...
Front Strut Assembly Disassembly and Reassembly
1.
Compress the coil spring with a strut spring compressor. Do not
compress the spring more than necessary.
2.
Loosen the lock nut.
...