1. |
Disconnect the battery negative terminal first, then the positive
terminal.
|
2. |
Remove the drive belt.
|
3. |
Disconnect the A/C compressor switch connector (A), the alternator
connector (B) and the cable from the alternator "B" terminal (C).
|
4. |
Remove the alternator (A).
|
5. |
Installation is the reverse order of removal.
|
6. |
Adjust the alternator belt tension after installation.
|
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the VIS valve connector.
3.
Measure resistance between VIS valve ...
5Door Side Body C
Side outer panel notch
Side outer panel notch
Side outer panel notch
...
Delivery Pipe Installation
•
Do not use already used injector fixing clip again.
...