1. |
Disconnect the battery negative terminal.
|
2. |
Remove the air duct and air cleaner assembly. (Refer to EM group)
|
3. |
Disconnect the starter cable (B) from the B terminal on the solenoid
then disconnect the connector (A) from the S terminal.
|
4. |
Remove the 2 bolts holding the starter, then remove the starter
(A).
|
5. |
Installation is the reverse of removal.
|
Accelerator Pedal Removal
1.
Turn the ignition switch OFF and disconnect the negative (-) battery
cable.
2.
Disconnect the accelerator position sensor connector (A). ...
Inspection
•
Frequent inhalation of brake pad dust, regardless of material
composition, could be ha ...
Tightening Torques
Engine Control System
Item
kgf.m
N.m
lb-ft
ECM installation bolt
1.0 ~ 1.2
9.8 ~ 11.8
7.2 ~ 8.7
ECM bracket installation ...