Kia Rio: Seat Belt Switch Description

Via the seat belt/Door switch, the ISG function can detect that the driver has fastened the seat belt/door. If the driver has not fastened the seat belt/door, the ISG function reacts as follows. If the seat belt or door is opened, the engine must not be started or stopped by the ISG function for safety reasons.

Door Switch Installation

1. Install is reverse of removal. ...

Seat Belt Switch Inspection

1. Remove the connector from the switch. 2. Check for continuity between terminals. Seat belt condition Continu ...

See also:

Rear Hub - Carrier Replacement
[Drum Type] 1. Remove the rear wheel & tire. Tightening torque: 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft) ...

Heater & A/C Control Unit (FATC) Components
Connector Pin Function Connector Pin No Function Connector Pin No Function A 1 IGN 2 B 17 HI-SCAN (K-L ...

A/C Pressure Transducer Inspection
1. Measure the pressure of high pressure line by measuring voltage output between terminal “1” and “2”. 2. Inspect the voltage valu ...