Kia Rio: Hood switch Inspection - ISG (Idle Stop & Go) System - Engine Control / Fuel System - Kia Rio UB 2012-2024 Service ManualKia Rio: Hood switch Inspection

1.
Disconnect the hood switch connector (A).


2.
Check for continuity between terminals


Hood switch Description
The hood switch is included as the influencing factors in the calculation of the ISG function. If the hood is open, the engine must not be started or stopped by the ISG function for safety re ...

Hood switch Removal
1. After loosening the mounting bolts and connector, then remove the hood switch (A). ...

See also:

SS-A Solenoid Valve(ON/OFF) Specifications
ON/OFF Solenoid Valve(SS-A, SS-B) ▷ Control type : Normal low type Control pressure kpa (kgf/cm², psi) 490.33(5.0, 71.12)  Internal resistance(&# ...

Storage compartment
These compartments can be used to store small items. To avoid possible theft, do not leave valuables in the storage compartment. Always keep the storage compartment covers closed while driving. Do ...

Lighting control
The light switch has a Headlight and a Parking light position. To operate the lights, turn the knob at the end of the control lever to one of the following positions: (1) OFF position (2) Parking ...

Copyright © www.kirmanual.com 2014-2024