1. |
Release the residual pressure in fuel line (Refer to the Fuel
Delivery System - Repair Procedures - "Release Residual Pressure in
Fuel Line").
|
2. |
Remove the rear seat [LH] (Refer to “Seat” in BD group).
|
3. |
Remove the fuel pump service cover (A).
|
4. |
Disconnect the fuel pump connector (A).
|
5. |
Disconnect the fuel feed tube quick connector (B).
|
6. |
Disconnect the fuel tank pressure sensor connector (C).
|
7. |
Disconnect the vapor tube (D).
|
8. |
Lift the vehicle and support the fuel tank with a jack.
|
9. |
Remove the center muffler assembly (Refer to “Intake And Exhaust
System” in EM group).
|
10. |
Disconnect the fuel filler hose (A) and the vapor hose (B).
|
11. |
Remove the parking brake line installation bolt (A).
|
12. |
Remove the fuel tank from the vehicle after removing the fuel
tank band (A).
|
Road warning
Hazard warning flasher
The hazard warning flasher serves as a warning to other drivers to exercise extreme
caution when approaching, overtaking, or passing your vehicle.
It should be used whenev ...
Compressor Installation
1.
Make sure of the length of compressor mounting bolts, and then
tighten it with the specified tightening order.
Tightening torque :
...
ESC Operation Mode
ESC Hydraulic System Diagram
1.
ESC Non-operation : Normal braking.
Solenoid valve
Continuity
Valve
Motor ...