1. |
Turn ignition switch OFF and disconnect the negative (-)battery
cable.
|
2. |
Remove the fuel pump assembly.
|
3. |
Check motor operation by fuel pump connector (A) connecting power(No.2)
and ground(No.4)
|
1. |
Using an ohmmeter, measure the resistance between terminals 1
and 3 of sender connector (A) at each float level.
|
2. |
Also check that the resistance changes smoothly when the float
is moved from "E" to "F".
|
Starter: Description
The starting system includes the battery, starter, solenoid switch, ignition
switch, inhibitor switch (A/T), clutch pedal switch (M/T), ignition lock switch,
connection wires and the battery ...
Intake Actuator Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the intake actuator connector.
3.
Verify that the intake actuato ...
Door Switch Installation
1.
Install is reverse of removal.
...