1. |
Turn the ignition switch OFF and disconnect the negative (-) battery
cable.
|
2. |
Disconnect the accelerator position sensor connector (A).
|
3. |
Remove the installation nuts (B), and then remove the accelerator
pedal module.
|
4Door Side Body
Front side member tooling hole (Ø12)
Fender apron upper member tooling hole (Ø7)
Front door upper hinge ...
Tire pressure monitoring system
(1) Low tire pressure telltale / TPMS malfunction indicator
Each tire, including the spare (if provided), should be checked monthly when
cold and inflated to the inflation pressure recommended by ...
System settings
Press the key
Select [System]
Select menu through
TUNE knob
Memory Information
Displays currently used memory and total system memory.
Select [Memory Information]
OK
The ...