Kia Rio: Delivery Pipe Installation
•
|
Do not use already used injector fixing clip again.
|
|
Do not reuse the support disc.
Do not reuse the injector rubber washer.
Do not reuse the combustion seal.
|
•
|
Install the component with the specified torques.
|
•
|
Note that internal damage may occur when the component
is dropped. In this case, use it after inspecting.
|
|
•
|
Apply engine oil to the injector O-ring.
|
•
|
Do not use already used injector O-ring again.
|
|
•
|
Do not use already used bolt again.
|
|
•
|
When insert the injector, be careful not to damage the
injector tip.
|
|
1. |
Installation is reverse of removal.
Delivery pipe installation bolt:
18.6 ~ 23.5 N.m (1.9 ~ 2.4 kgf.m, 13.7 ~ 17.4 lb-ft)
High pressure fuel pipe installation
nut:
26.5 ~ 32.4 N.m (2.7 ~ 3.3 kgf.m, 19.5 ~ 23.9 lb-ft)
|
|
In case of removing the high pressure fuel pump, high pressure
fuel pipe, delivery pipe, and injector, there may be inju ...
In case of removing the high pressure fuel pump, high pressure
fuel pipe, delivery pipe, and injector, there may be inju ...
See also:
Audio Unit Removal
•
Take care not to scratch the center fascia panel and related
parts.
...
Door Switch Description
Via the seat belt/Door switch, the ISG function can detect that the driver
has fastened the seat belt/door. If the driver has not fastened the seat belt/door,
the ISG function reacts as follo ...
Lubricants
Engine
Lubricants
Quantity
Gasoline 1.6(MT)
BJ
GRB006
80g
TJ
SH06 - VX21
LH:130g, RH:115g
...