Kia Rio: Removal
| 1. |
Remove the transaxle assembly.
(Refer to "Manual transaxle system" in MT group)
|
| 2. |
Remove the clutch cover bolts. Be careful not to be bent ortwist
bolts. Loosen bolts in diagonal directions.
|
Components
1. Clutch release fork
2. Clutch cover assembly
3. Clutch disk assembly
4. Clutch release bearing
...
Inspection
1.
Inspect diaphragm spring wear which is in contact with a concentric
slave cylinder bearing.
2.
Check the clutch cover and disc surface f ...
See also:
Positive Crankcase Ventilation (PCV) Valve: Installation
1.
Installation is reverse of removal.
PCV Valve installation:
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)
...
Removal
When replacing the ECM, the vehicle equipped with immobilizer
must be performed the procedure as below.
...
Circuit Diagram
(M/T)
(A/T)
...
Copyright © www.kirmanual.com 2014-2024