Kia Rio: Inspection
| 1. |
Inspect diaphragm spring wear which is in contact with a concentric
slave cylinder bearing.
|
| 2. |
Check the clutch cover and disc surface for wear or cracks.
|
| 3. |
Check the clutch disc lining for slipping or oil marks.
|
| 4. |
Measure the depth from a clutch lining surface to a rivet. If
the measured value is less than the specification below, replace it.
|
Removal
1.
Remove the transaxle assembly.
(Refer to "Manual transaxle system" in MT group)
2.
Remove the clutch cover bolts. Be care ...
Installation
1.
Replace a clutch cover and disc as a set.
•
...
See also:
Cruise Control Switch: Circuit Diagram
...
Valve Body Description
The valve body is essential to automatic transaxle control and consists
of various valves used to control the oil feed from the oil pump. Specifically,
these valves consist of pressure regula ...
High Pressure Fuel Pump Removal
In case of removing the high pressure fuel pump, high pressure
fuel pipe, delivery pipe, and injector, there may be inju ...
Copyright © www.kirmanual.com 2014-2024