1. |
Replace a clutch cover and disc as a set.
|
2. |
Apply grease on a disc spline part and transmission input shaft
spline part as required.
|
3. |
The 'T/M SIDE' marked surface should face the transmission.
|
4. |
Install the clutch disc and the cover with SST(A : 09411-1P000).
|
5. |
Install the clutch cover bolts. Not to be bent or twisted, Tighten
them in diagonal directions.
|
6. |
Install the transaxle assembly.
(Refer to "Manual transaxle system" in MT group.)
|
AGM Battery: Description
AGM battery is used for especially heavy load on the vehicle network depending
on equipment and requirements. AGM stands for Absorbent Glass Material Battery;
that is absorbent glass fibre fl ...
Inspection
1.
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
2.
Disconnect the fuel pressure regulator valve connector.
...
Components
1. Parking brake lever
2. Adjuster cable
3. Equalizer assembly
4. Parking brake cable
...