Kia Rio: Removal
|
| 1. |
Disconnect the ignition lock switch connector (A) and clutch switch
(B).
|
| 2. |
Disconnect the push rod (B) from the clutch pedal by removing
the snap pin (A) and washer.
|
| 3. |
Remove the clutch pedal mounting nuts (A-4ea).
|
| 4. |
Remove the clutch pedal assembly.
|
Inspection
Clutch Pedal Inspection
1.
Measure the clutch pedal height (from the face of the pedal pad
to the floorboard) and the clutch pedal clevis pin play (measured at
the ...
Installation
1.
Installation is in reverse order of removal.
...
See also:
Description
Manifold Absolute Pressure Sensor (MAPS) is a speed-density type sensor
and is installed on the surge tank. It senses absolute pressure of the surge
tank and transfers the analog signal propo ...
Installation
1.
Install in the reverse order of removal.
...
Vehicle load limit
Tire and loading information label
The label located on the driver's door sill gives the original tire size, cold
tire pressures recommended for your vehicle, the number of people that can be ...
Copyright © www.kirmanual.com 2014-2024