Kia Rio: Removal
|
| 1. |
Disconnect the push rod (B) from the clutch pedal by removing
the snap pin (A) and washer.
|
| 2. |
Remove the clutch pedal mounting nuts (B-3ea).
|
| 3. |
Remove the battery and ECM.
(Refer to "Manual transaxle system" in MT group)
|
| 4. |
Disconnect the clutch tube (B) and reservoir hose (A) from the
clutch master cylinder.
|
| 5. |
Remove the clutch master cylinder by turning it clockwise (A).
|
Components
1. Master cylinder
2. Ignition lock switch
3. Clutch switch
4. Pedal pad
...
Installation
1.
Installation is the reverse of removal.
•
...
See also:
SRS Control Module (SRSCM) Removal
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable and wait for at least three
minutes before beginning ...
Component Location
1. Head cap
2. Nut
3. Rear wiper arm & Blade
4. Packing (rubber)
5. Rear wiper motor assembly
6. Bolt
...
Audio Head Unit
1. (EJECT)
Ejects the disc.
2.
Changes to FM/AM/SIRIUS mode.
Each time the key is pressed, the mode is changed in order of FM1 ➟ FM2
➟ AM ➟ SAT1 ➟ SAT2 ...
Copyright © www.kirmanual.com 2014-2024