Kia Rio: Manual Transaxle Components
| 1. Transaxle support mounting bracket 2. Control shaft complete |
3. Back up lamp switch 4. Vehicle speed sensor |
- Manual Transaxle Removal
- Manual Transaxle Installation
- Shift Lever Components
- Shift Lever Removal
- Shift Lever Inspection
- Shift Lever Adjustment
- Back-up Lamp Switch Description
- Back-up Lamp Switch Specifications
- Back-up Lamp Switch Inspection
- Back-up Lamp Switch Replacement
Inspection
Manual Transaxle Oil Inspection
1.
Park the vehicle on a level ground and stop the engine.
2.
Retighten the oil filler plug (A ...
Manual Transaxle Removal
1.
Remove the following items;
A.
Air cleaner assembly (A) and air duct (B) .
(Refer to "Intake and Exhaust system" ...
See also:
Circuit Diagram
(M/T)
(A/T)
...
Description
Canister Close Valve (CCV) is normally open and is installed on the canister
ventilation line. It seals evaporative emission control system by shutting the
canister from the atmosphere during ...
Hazard Lamp Switch Inspection
1.
Operate the switch and check for continuity between terminals.
...
Copyright © www.kirmanual.com 2014-2024