1. |
In neutral position, disjoin select cable (A) from shift lever
assembly pin (B).
|
2. |
Disconnect select adjuster (A) to an arrow.
|
3. |
Shift to the 3th gear position.
|
4. |
Adjustment adjuster (B) on select cable (A) as rolling from side
to side.
|
5. |
Insert on free load and press the adjuster.
|
6. |
After shifting 2nd gear, cheking the left select gap about 1mm(if
not, loop no, 1~5)
|
7. |
In neutral position, jion by clip (A).
|
Components
1. Steering wheel
2. Steering column & EPS unit assembly
3. Universal joint assembly
4. Steering gear box
...
Clutch & Brake
The 6-spd automatic transaxle consists of an overdrive clutch (OD/C),
a one-way clutch (OWC), a lower and reverse brake (LR/B), an underdrive brake
(UD/B), a 26 brake (26/B), and a 35R clutch ...
Hood
Opening the hood
1.Pull the release lever to unlatch the hood. The hood should pop open slightly.
Open the hood after turning off the engine on a flat surface, shifting the shift
lever to the P( ...