Kia Rio: Back-up Lamp Switch Replacement - Manual Transaxle Components - Manual Transaxle System - Kia Rio UB 2012-2024 Service ManualKia Rio: Back-up Lamp Switch Replacement

1.
Disconnect the back up lamp switch connector (A).


2.
Remove the back up lamp switch (A).


3.
Replace a new one and install the back up lamp switch.

Tightening torque:
29.4 ~ 34.3 N.m (3.0 ~ 3.5 kgf.m, 21.7 ~ 25.3 lb-ft)

Back-up Lamp Switch Inspection
1. Disconnect the back up lamp switch connector (A). 2. Check the continuity between no. 1 and 2 terminals of backup lamp switch. W ...

Automatic Transaxle System
...

See also:

Components Location
1. Battery sensor 2. Brake Booster Vacuum Pressure Sensor (BBVPS) 3. AGM battery 4. DC/ DC Converter (LDC) 5. ISG OFF Switch 6. Alternator 7. Starter 8. Brake s ...

Rain Sensor Circuit Diagram
...

Description
The hydraulic system consists of oil, an oil filter, an oil pump, and a valve body (valves and solenoid valves). The oil pump is powered by the engine. ATF passes through the oil filter and g ...

Copyright © www.kirmanual.com 2014-2024