Kia Rio: Transaxle Control Module (TCM) Terminal Function
Connector [EGGG-AA]
| Pin |
Description |
Pin |
Description |
| 22 |
Shift solenoid D (VFS-OD) |
73 |
Inhibitor switch signal "S4" |
| 23 |
Pressure cont solenoid (VFS-LINE) |
74 |
Inhibitor switch signal "S2" |
| 26 |
Shift solenoid F (SS-B) |
75 |
Inhibitor switch signal "S3" |
| 37 |
Sports mode up switch |
87 |
Solenoid power 1 |
| 38 |
Sports mode select switch |
88 |
Solenoid power 2 |
| 39 |
Oil temperature sensor (+) |
89 |
Shift solenoid E (SS-A) |
| 43 |
Shift solenoid A (VFS-UD) |
94 |
Inhibitor switch signal "S1" |
| 44 |
Shift solenoid C (VFS-35R) |
95 |
Output speed sensor power |
| 45 |
Torque converter control solenoid (T/CON_VFS) |
96 |
Input speed sensor power |
| 46 |
Shift solenoid B (VFS-26B) |
99 |
Input speed sensor signal |
| 58 |
Sports mode down switch |
100 |
Output speed sensor signal |
| 59 |
Oil temperature sensor (-) |
|
|
Connector [EGGG-AK]
| Pin |
Description |
Pin |
Description |
| 1 |
GND (Power) |
5 |
VB |
| 2 |
GND (Power) |
60 |
CAN High |
| 3 |
VB (Battery voltage) |
68 |
IG.1 ( Ignition key) |
| 4 |
Ground (Power) |
77 |
CAN Low |
See also:
Steering Column and Shaft Adjustment
After or before servicing the EPS system, perform the troubleshooting
and test procedure as follows. Compare the system condition with normal condition
in the table below and if abnormal symp ...
Description
Rail Pressure Sensor (RPS) is installed on the delivery pipe and measures
the instantaneous fuel pressure in the delivery pipe. The sensing element (Semiconductor
element) built in the sensor ...
CVVT (Continuously Variable Valve Timing) System: [CVVT System Mode]
(1) Low Speed / Low Load
(2) Part Load
(3) Low Speed / High Load
(4) High Speed / High Load
...
Copyright © www.kirmanual.com 2014-2024